WPNT834 Manual: Upgrading the Router Software

Upgrading the Router Software

Tip: To ensure you are always using the latest firmware, enable the Firmware Upgrade Assistant feature so that the router will automatically detect a new version of the firmware on the Internet and alert you to its availability.

This screen appears at login unless you check Do Not Display This Message Again and click Yes.

Figure 6-6

Tip: Before upgrading the router software, use the router backup menu to save your configuration settings. A router upgrade may revert the router settings back to the factory defaults. If so, after completing the upgrade, you can restore your settings from the backup.

The routing software of the WPNT834 router is stored in FLASH memory, and can be upgraded as new software is released by NETGEAR. Upgrade files can be downloaded from the NETGEAR Web site. If the upgrade file is compressed (.ZIP file), you must first extract the file before sending it to the router. The upgrade file can be sent to the router using your browser.

Note: The Web browser used to upload new firmware into the WPNT834 router must support HTTP uploads. NETGEAR recommends using Microsoft Internet Explorer or Netscape Navigator 3.0 or above.

From the main menu of the browser interface, under the Maintenance heading, select the Router Upgrade link to display the menu shown below.

Figure 6-7

To upload new firmware:

Click the Check button to download and unzip (if the download file is a .zip file) the new software file from NETGEAR.

Click the Browse button and browse to the location of the upgrade file.

Click Upload.

Warning: When uploading software to the WPNT834 router, it is important not to interrupt the Web browser by closing the window, clicking a link, or loading a new page. If the browser is interrupted, it may corrupt the software. When the upload is complete, your router will automatically restart. The upgrade process typically takes about one minute.

In some cases, you may need to reconfigure the router after upgrading.

	Tip: To ensure you are always using the latest firmware, enable the Firmware Upgrade Assistant feature so that the router will automatically detect a new version of the firmware on the Internet and alert you to its availability.

	Tip: Before upgrading the router software, use the router backup menu to save your configuration settings. A router upgrade may revert the router settings back to the factory defaults. If so, after completing the upgrade, you can restore your settings from the backup.

	Note: The Web browser used to upload new firmware into the WPNT834 router must support HTTP uploads. NETGEAR recommends using Microsoft Internet Explorer or Netscape Navigator 3.0 or above.

	Warning: When uploading software to the WPNT834 router, it is important not to interrupt the Web browser by closing the window, clicking a link, or loading a new page. If the browser is interrupted, it may corrupt the software. When the upload is complete, your router will automatically restart. The upgrade process typically takes about one minute.

NETGEAR, Inc.
http://www.netgear.com

202-10130-01, January 2006

173 visits (2 today, 2 this week, 25 this month, 173 this year)
Uptime: 08:26:20 up 4 days, 14:09, 3 users, load average: 0.00, 0.00, 0.00
18.222.119.143 GET from server z.larrymurakami.com

Sunday, December 22, 2024 @ 8:26:20 AM
z.ServerAdmin@lam1.us